Smart Water Level
The SmartWaterLevel System (SWL) is used to monitor water levels either in direct embedment in embankments and earth dams or in open wells, tanks, standpipes, or open bodies of water. It features a piezometer paired with a solar charged, battery powered data acquisition system which automatically uploads measurements to our cloud based Smart Structures data management system. The Sensor360(r) allows clients to remotely access their data and can provide stake holders with email/ text message alerts of rapidly changing conditions in addition to user frequency selectable reports.

The main components of SmartWater Level are:
Transducer
Measures and record water level, water pressure, conductivity, and temperature with the sensors.
Communications
It has Cellular coverage with 4G LTE Category M1/NB-IoT and 2G networks, or Iridium satellite coverage. It Includes continuous GPS, encrypted connections, enhanced in-device alarms, and IP68 waterproof rating.
Dashboard
The Dashboard provides you the real-time access to your data via the cloud-based Smart-structures data management system. The Sensor360(r) allows clients to remotely access their data and can provide stake holders with email/ text message alerts of rapidly changing conditions in addition to user frequency selectable report.
APPLICATION
- Controlling water pressure during consolidation by continuous monitoring.
- Prediction of slope failure and remediation
- Design for lateral earth pressures
- Design for uplift pressures and buoyancy
- Monitor seepage, determine phreatic line, and verify models of flow
- Monitor surface water run-off
- Monitor rate and direction of flow of contaminated water
- Monitor encroachment of salt water into fresh water acquifiers
SPECIFICATION
Transducer Type | Vibrating wire |
---|---|
Range | 3.5/7.0/10/15/20/35 BAR |
Resolution | +/-0.025% Full Scale |
Accuracy | +/- 0.1% Full Scale |
Non-Linearity | <0.5% F.S. |
Operating Temperature | 20C to +80C |
Thermal Zero Shift | <0.05% to F.S./C |
Filter | High & Low Air Entry Ceramic Filter |
Overload | 150% F.S. |
Electric Supply | 5-12V DC |
Dimension | 20mm dia x 145 mm length |
Shield Material Grade | Stainless Steel |